An insulated aluminum patio cover in Marshall, TX typically costs $30 to $60 per square foot installed, so a common 12 by 20 attached cover lands near $7,000 to $15,000 according to the 2026 HomeGuide covered patio cost guide. The insulation matters here: NOAA 1991 to 2020 climate normals put North Louisiana at roughly 96 to 99 days a year at or above 90 degrees, and a foam core panel roof stops that heat from radiating down onto the patio the way a single sheet of metal does. Donnie Grubbs builds every cover with Structall insulated roof panels and our own crews, and has since 1976.
What should patio covers cost in Marshall, TX? That depends on how far you take the scope, the materials you select, and what condition things are in now. This page lays out typical local pricing, the cost drivers that matter, and the way we manage the job end to end.
Marshall is the county seat of Harrison County, Texas, and the 2020 census counted 23,392 residents. The Census Bureau's American Community Survey puts the median year built for homes here at 1971, across 9,754 housing units, which means a large share of the houses we would be asked about are now more than fifty years old. Older roofs over patios, original single pane or tired windows, and porches that never got a real cover are common conversations. The city sits on Interstate 20, about 40 miles west of Shreveport, and it is roughly 140 miles by road from Monroe, Louisiana. We are a family owned company founded in 1976, working from our office and showroom at 402 Cypress Street in West Monroe, Louisiana. We do not have a Marshall office or a Marshall crew. Projects here are scheduled and run from West Monroe. The area has a humid subtropical climate with hot summers, and Marshall is known for its older neighborhoods, including the Ginocchio National Historic District, and for the Wonderland of Lights each holiday season. In that kind of heat, an insulated aluminum roof panel from Structall on a patio cover or pergola keeps the space usable, screen rooms and glass rooms extend the season, and ProVia replacement windows help older walls hold their temperature. Residential building permits in Marshall are handled by the city Permits and Inspections Division at 401 South Alamo Boulevard, 903 934 7994, open 8 a.m. to 5 p.m. Monday through Friday, and we confirm permit requirements with them before we build.
The typical Marshall home dates to around 1971 per Census data, roughly 55 years of Texas weather and daily use. The market covers about 9,754 homes, and the median value sits near $133,000. Most of Marshall went up in the postwar decades. The structure on these homes is usually sound, but venting, flashing, and insulation details are dated enough to be worth revisiting while the patio covers work is already open and the access is already paid for. A large share of occupied homes here are rented, so scheduling and approvals often run through an owner or a property manager rather than the person who answers the door. We are used to that, and we keep both parties on the same email so nothing stalls. Values in Marshall sit toward the lower end of the markets we serve, so the question is usually which option returns the most service life per dollar, and we will show you the point where spending more stops paying for itself. It is the kind of local detail that changes how a patio covers project should be planned. Figures are U.S. Census Bureau American Community Survey estimates.
These are typical installed ranges from the 2026 HomeGuide and Angi cost guides, sized for common Marshall, TX patios. Your exact price depends on the slab, the roofline, the panel thickness, and any electrical work, and comes from a free in home estimate.
| Patio cover type | Typical installed range |
|---|---|
| Attached insulated cover, 10 by 16 (160 sq ft) | $4,800 to $9,600 |
| Attached insulated cover, 12 by 20 (240 sq ft) | $7,200 to $14,400 |
| Attached insulated cover, 16 by 24 (384 sq ft) | $11,500 to $23,000 |
| Aluminum lattice pergola, 10 by 10 (100 sq ft) | $2,100 to $6,400 |
| Freestanding cover or carport | Same per square foot range plus extra posts and footings |
Figures are typical ranges and vary by project. Your free estimate is exact.
Donnie Grubbs measures your project and gives you a clear written estimate at no cost.
We are a local home improvement contractor and we stand behind every job. You are not handed off to a subcontractor. Every job follows the same disciplined process:
A plain metal patio cover blocks the sun and then radiates the heat straight back down on you by three in the afternoon. In Marshall, TX, where NOAA's 1991 to 2020 normals show summer highs averaging in the low to mid 90s and roughly 96 to 99 days a year at or above 90 degrees, that turns a covered patio into a space you only use after dark. A Structall panel puts a foam core between two aluminum skins, so the underside stays close to shade temperature and doubles as a finished ceiling for a fan. Donnie Grubbs has built covers in this climate since 1976, and the insulated roof is the single biggest reason customers tell us they actually use the patio in July.
Donnie Grubbs works across the Marshall area, including:
An insulated aluminum patio cover in Marshall, TX typically runs $30 to $60 per square foot installed, per the 2026 HomeGuide covered patio guide. That puts a 10 by 16 cover near $4,800 to $9,600, a 12 by 20 near $7,200 to $14,400, and a 16 by 24 near $11,500 to $23,000. Fans, lights, a freestanding design, or a difficult roof tie in move the number up. Donnie Grubbs does not price from a chart; we measure on site and give you a free written price for the whole job.
Yes. Donnie Grubbs offers military and senior discounts on every project, and we accept cash, check, Visa, Mastercard, Discover and American Express. Ask at the estimate and we apply it to the written price.
Yes. Donnie Grubbs is a local, licensed and insured home improvement contractor, family owned in West Monroe since 1976, and BBB accredited with an A+ rating. Every patio cover is built by our own crews, not a subcontractor.
Attached is the most common job we do in Marshall, TX: the cover ties into the roof or fascia and runs out over the slab on square aluminum posts, so it costs less and looks like part of the house. Freestanding makes sense when the cover cannot tie in, when you want shade over a pool deck or a boat, or for a second parking spot, and it costs more because it carries its own roof on more posts with footings.
It is a roof made of Structall panels, which laminate a rigid expanded polystyrene foam core between two aluminum skins and snap together at the joints. The foam stops heat from radiating down onto the patio, the panels span 10 feet or more between supports depending on thickness, and the underside is a finished white ceiling that can hold fans and lights. A single sheet metal cover does none of that.
Yes in nearly every case. Louisiana enforces the 2021 International Residential Code with state amendments, and patio covers are covered by Appendix AH, which limits them to one story, 12 feet in height, and outdoor living use rather than habitable rooms. Enforcement is local, so the permit comes from the city or parish building office, and the plans need to show wind uplift resistance. Donnie Grubbs handles the permit paperwork as part of the job.
The foam core does the work: an insulated panel roof keeps the underside near shade temperature instead of radiating stored heat like bare metal, which is why homeowners in Marshall, TX tell us the difference is obvious on the first 95 degree afternoon. NOAA normals give North Louisiana roughly 96 to 99 days a year at or above 90 degrees, so a cover that only works after sunset misses most of the summer.
Yes, and it is the most common add on. Because the Structall panel underside is a solid finished ceiling, we can run wiring inside the beam for ceiling fans, recessed lights, and outlets. Ask for the fan at the estimate so the wiring goes in with the roof rather than as a second visit.
Call Donnie Grubbs or send the estimate form and we schedule a free in home visit in Marshall, TX. We look at the slab, the roofline and drainage, measure, and hand you a clear written price with no obligation. Most estimates take under an hour.
Yes. Our covers are designed so screen panels or sliding glass can be added to the openings later, turning the cover into a screen room or a glass room. Tell us at the estimate if that is the plan and we size the posts and beams for it now, which is far cheaper than rebuilding the roof to add a room later.
Professional pergola installation runs about $2,100 to $6,400 for a 100 square foot structure per Angi's 2026 data, with most homeowners near $4,250. Aluminum sits at the affordable end of the material range and, unlike wood, never needs painting, will not rot, and does not feed termites through a wet Louisiana spring. Donnie Grubbs builds lattice pergolas for filtered shade where a solid roof would close off the sky.
No. Aluminum does not rust, and the factory finish on the panels and posts does not need painting. That is the reason we build with aluminum instead of wood in this climate: nothing to rot, warp, repaint, or attract termites. Rinsing pollen and dust off the ceiling once a year is the entire maintenance list.
The median Marshall home was built around 1971 per Census American Community Survey data, so a large share of the housing stock is 55 or more years old. That is the age where patio covers and the other big updates come due, and it is the work Donnie Grubbs does every week.
Marshall is the county seat of Harrison County, Texas, and the 2020 census counted 23,392 residents. Donnie Grubbs plans around those specifics from the first visit.
Serving Marshall from our West Monroe office.
Local, licensed and insured, and proud to do the work ourselves. Tell us about your project and we will give you a clear written estimate at no cost.
Request My Free Estimate →or call (318) 324-1232